Heat pumps
The air/water heat pump for heating and/or cooling is a piece of equipment that makes use of the energy (heat) existing in the air to heat and/or cool water by “pumping” this heat from the outside of the dwelling to the inside. Domusa Teknik air/water heat pumps are monobloc heat pumps, which means that the transfer of heat or cold to the water is done inside the outdoor unit, without the need to pipe cooling gas into the building.
These units are characterised by their high energy efficiency, measured in “COP”, which provides significant savings compared to other types of fossil fuels (diesel and gas). The best heat pump is the one that combines a cheap purchase price with a high level of COP efficiency and the product offered by Domusa Teknik is classified with the A+++ rating, the highest possible rating under prevailing regulations.
Our range of heat pumps has a wide range of solutions, both in outdoor units and in interior installation accessories for producing domestic hot water, which makes us the benchmark supplier in the sector for this type of product.
- NEW Maximum efficiency
Dual Clima HTDual Clima HT high temperature air source heat pumps
- Monoblock
- High temperature heat pump 75º C
- Natural refrigerant with low GWP
- Scop as high as 6.4, high efficiency
- Sizes: 6, 9,12,16,19 and 22 kw
Dual Clima HT ECDual Clima HT high temperature air source heat pumps with MODBUS connection
- Monoblock
- High temperature heat pump 75º C
- Natural refrigerant with low GWP
- Scop as high as 6.4, high efficiency
- Sizes: 6, 9,12,16 and 22 kw
- EC range
ACQUA TRIO/DUO SEFloor mounted indoor unit for air source heat pump
- Integrated inertia tank
- Optional additional backup heating element for summer mode (only for the TRIO model).
- Stainless steel DHW tank.
- ACQUA TRIO SE: for heating, dhw and cooling
- ACQUA DUO SE: or heating and dhw
- EC range: Modbus connection module included
- NEW Maximum efficiency
ACQUA TRIO/DUO MEwall-mounted
- Integrated inertia tank
- Optional additional backup heating element for summer mode (only for the TRIO model).
- Stainless steel DHW tank.
- ACQUA TRIO ME: for heating, dhw and cooling
- ACQUA DUO ME: or heating and dhw
- EC range: Modbus connection module included
ACQUA TRIO ODOutdoor installation
- Integrated inertia tank
- Optional additional backup heating element for summer mode.
- Stainless steel DHW tank
FUSION TRIOHydraulic module for air source heat pump DUAL CLIMA
- Integrated buffer tank
- Stainless steel dhw cylinder
- Fully equipped
- EC range: Modbus connection module included
Dual Clima RAir Source Heat Pump
- Complete installation solution Pack (Heating, Cooling and DHW)
- Fully rated heating capacity guaranteed to -20ºC
- Can be combined with other energies (Solar, Gas, Oil)
- Sizes: 6, 9, 12, 16 and 19 kW
- Cooling gas R32 (Higher performance and lower environmental impact)
FUSIONAll in one hydraulic module for heat pumps
- Integrated hydraulic module
- Stainless steel buffer tank
- Completely equipped
- EC range: Modbus connection module included